My next class:

Windows 7 / 2008 R2 Service Pack 1 Problems

Published: 2011-02-24. Last Updated: 2011-02-24 13:45:34 UTC
by Johannes Ullrich (Version: 1)
28 comment(s)

I will use this post to collect some of the problems we are hearing about with Windows 7 SP1 and Windows 2008 R2 SP1. Right now, there is no urgent reason to install this service pack and it should be tested first.

A few areas to watch:

- Whitelisting / Blocklisting: Whitelisting software may not have checksums yet to verify all the files that are modified by the service pack. Same for anti-virus: Some anti virus products monitor system files for changes and may sound an alert or block the installation of SP 1

- Firewalls: Third party firewalls may find that some of the low level hooks they use have changed.

- Disk Encryption: In particular full disk encryption that modifies the boot process may find that some of the changes it did are undone by the SP install

- Custom hardware: If you are using drivers other then those that are included in Windows 7 (or 2008 R2), be careful.

Specific examples. Consider them anecdotal but if you run any software mentioned here, or similar software, this list should give you a guide to test.

  • Users with old versions of Microsoft Security Essentials may not be able to install SP1. Upgrade first.
  • Samsung Galaxy S phone drivers may have problems with SP1
  • some users reported very long install times (> 1hr. but not all that unusual for a service pack)
  • Chrome 10 and 11 have issues according to some tweets
  • Word 2003 VBA
  • slower boot times with SP1 then without
  • some reports of download issues due to overloaded servers
  • Lenovo's Thinkvantage System Update may not work (update it before applying the SP)
  • EVGA Precision Utility 2.0.2 (Graphics card stats program liked by gamers)
  • MSI Afterburner
  • some issues with Bitlocker are reported. But no confirmation at this point and it may also be due to entering the wrong password on reboot (you have to reboot a couple times in certain situations)

Link to a technet page with reports of install issues:

http://technet.microsoft.com/en-us/library/ff817622%28WS.10%29.aspx

If all fails, here a link with an uninstall procedure for SP1:

http://windows.microsoft.com/en-US/windows7/uninstall-sp1

To temporarily block installation of the service pack:

http://www.microsoft.com/downloads/en/details.aspx?FamilyID=d7c9a07a-5267-4bd6-87d0-e2a72099edb7&displaylang=en

 

 

------
Johannes B. Ullrich, Ph.D.
SANS Technology Institute
Twitter

28 comment(s)
My next class:

Comments

I have had two different win7 (x64) machines that I had been unable to install sp1 on. I am installing manually from the (gigantic) x64 download file. I have used this same exact file to update two 2008r2 x64 servers already, so I know that the file is OK. (I have also tried to update both machines via automatic updates, and that just flat out fails, for sp1.)
Has anyone else seen this behaviour? (and/or know how to fix it?) m$ suggests running the 'update readiness tool', but that does nothing to resolve the issue either.
Also, the one machine is fresh out of the box from HP, and has nothing 3rd party on it. I am running the newest MSE on both as well.
sorry, I can't edit posts, screenshot here: http://twitpic.com/43975c
SP1 install on 64-bit Win7 Ultimate failed badly overnight on my Lenovo Thinkpad W700. It's in rebuild mode now. No clue yet what broke.
I've installed it successfully on Windows 7 Professional 32-bit and 64-bit with no issues.
BRAND NEW HP/COMPAQ laptop out of the box WILL NOT load sp1 x64, SAME issue as the previous screenshot. NO AV, NOTHING has been done to this machine other than the initial config that you have to go through to get to windows on a first boot on an OEM machine.
I refuse to believe that I am the only one having this issue, can anyone shed any light on this?!
It borked my Windows XP mode, had to reinstall the VPC.
1. Tried on two new HP Laptops, where Hard disc of Windows shrunk to allow a partition for on-disc back up. No capability to load SP1 per error number as any attempt to partition with other than windows software will eliminate ability of SP1 to read Windows System partition to allow it to load.
2. I think MS have shot themselves in the foot here! Many folk a) dual boot b)alter partitions to allow other back up software to work.
3. Comment is that in Europe this could be construed as misuse of a dominant position and allow even greater fines on MS. Or was it just bad software writing!
I had a successful install of SP1 (Windows 7 Enterprise, 32-bit) on a laptop dual-booted with (and probably partitioned by) Linux. Aside from trouble with the machine overheating during the install, it went smoothly.
I run Checkpoint Full Disk Encryption (FDE) and haven't had any problems.

Diary Archives